#if !defined(RADIOLIB_LR11X0_COMMANDS_H) #define RADIOLIB_LR11X0_COMMANDS_H #include "../../TypeDef.h" #if !RADIOLIB_EXCLUDE_LR11X0 // LR11X0 SPI commands #define RADIOLIB_LR11X0_CMD_NOP (0x0000) #define RADIOLIB_LR11X0_CMD_WRITE_REG_MEM (0x0105) #define RADIOLIB_LR11X0_CMD_READ_REG_MEM (0x0106) #define RADIOLIB_LR11X0_CMD_WRITE_BUFFER (0x0109) #define RADIOLIB_LR11X0_CMD_READ_BUFFER (0x010A) #define RADIOLIB_LR11X0_CMD_CLEAR_RX_BUFFER (0x010B) #define RADIOLIB_LR11X0_CMD_WRITE_REG_MEM_MASK (0x010C) #define RADIOLIB_LR11X0_CMD_GET_STATUS (0x0100) #define RADIOLIB_LR11X0_CMD_GET_VERSION (0x0101) #define RADIOLIB_LR11X0_CMD_GET_ERRORS (0x010D) #define RADIOLIB_LR11X0_CMD_CLEAR_ERRORS (0x010E) #define RADIOLIB_LR11X0_CMD_CALIBRATE (0x010F) #define RADIOLIB_LR11X0_CMD_SET_REG_MODE (0x0110) #define RADIOLIB_LR11X0_CMD_CALIB_IMAGE (0x0111) #define RADIOLIB_LR11X0_CMD_SET_DIO_AS_RF_SWITCH (0x0112) #define RADIOLIB_LR11X0_CMD_SET_DIO_IRQ_PARAMS (0x0113) #define RADIOLIB_LR11X0_CMD_CLEAR_IRQ (0x0114) #define RADIOLIB_LR11X0_CMD_CONFIG_LF_CLOCK (0x0116) #define RADIOLIB_LR11X0_CMD_SET_TCXO_MODE (0x0117) #define RADIOLIB_LR11X0_CMD_REBOOT (0x0118) #define RADIOLIB_LR11X0_CMD_GET_VBAT (0x0119) #define RADIOLIB_LR11X0_CMD_GET_TEMP (0x011A) #define RADIOLIB_LR11X0_CMD_SET_SLEEP (0x011B) #define RADIOLIB_LR11X0_CMD_SET_STANDBY (0x011C) #define RADIOLIB_LR11X0_CMD_SET_FS (0x011D) #define RADIOLIB_LR11X0_CMD_GET_RANDOM_NUMBER (0x0120) #define RADIOLIB_LR11X0_CMD_ERASE_INFO_PAGE (0x0121) #define RADIOLIB_LR11X0_CMD_WRITE_INFO_PAGE (0x0122) #define RADIOLIB_LR11X0_CMD_READ_INFO_PAGE (0x0123) #define RADIOLIB_LR11X0_CMD_GET_CHIP_EUI (0x0125) #define RADIOLIB_LR11X0_CMD_GET_SEMTECH_JOIN_EUI (0x0126) #define RADIOLIB_LR11X0_CMD_DERIVE_ROOT_KEYS_AND_GET_PIN (0x0127) #define RADIOLIB_LR11X0_CMD_ENABLE_SPI_CRC (0x0128) #define RADIOLIB_LR11X0_CMD_DRIVE_DIOS_IN_SLEEP_MODE (0x012A) #define RADIOLIB_LR11X0_CMD_RESET_STATS (0x0200) #define RADIOLIB_LR11X0_CMD_GET_STATS (0x0201) #define RADIOLIB_LR11X0_CMD_GET_PACKET_TYPE (0x0202) #define RADIOLIB_LR11X0_CMD_GET_RX_BUFFER_STATUS (0x0203) #define RADIOLIB_LR11X0_CMD_GET_PACKET_STATUS (0x0204) #define RADIOLIB_LR11X0_CMD_GET_RSSI_INST (0x0205) #define RADIOLIB_LR11X0_CMD_SET_GFSK_SYNC_WORD (0x0206) #define RADIOLIB_LR11X0_CMD_SET_LORA_PUBLIC_NETWORK (0x0208) #define RADIOLIB_LR11X0_CMD_SET_RX (0x0209) #define RADIOLIB_LR11X0_CMD_SET_TX (0x020A) #define RADIOLIB_LR11X0_CMD_SET_RF_FREQUENCY (0x020B) #define RADIOLIB_LR11X0_CMD_AUTO_TX_RX (0x020C) #define RADIOLIB_LR11X0_CMD_SET_CAD_PARAMS (0x020D) #define RADIOLIB_LR11X0_CMD_SET_PACKET_TYPE (0x020E) #define RADIOLIB_LR11X0_CMD_SET_MODULATION_PARAMS (0x020F) #define RADIOLIB_LR11X0_CMD_SET_PACKET_PARAMS (0x0210) #define RADIOLIB_LR11X0_CMD_SET_TX_PARAMS (0x0211) #define RADIOLIB_LR11X0_CMD_SET_PACKET_ADRS (0x0212) #define RADIOLIB_LR11X0_CMD_SET_RX_TX_FALLBACK_MODE (0x0213) #define RADIOLIB_LR11X0_CMD_SET_RX_DUTY_CYCLE (0x0214) #define RADIOLIB_LR11X0_CMD_SET_PA_CONFIG (0x0215) #define RADIOLIB_LR11X0_CMD_STOP_TIMEOUT_ON_PREAMBLE (0x0217) #define RADIOLIB_LR11X0_CMD_SET_CAD (0x0218) #define RADIOLIB_LR11X0_CMD_SET_TX_CW (0x0219) #define RADIOLIB_LR11X0_CMD_SET_TX_INFINITE_PREAMBLE (0x021A) #define RADIOLIB_LR11X0_CMD_SET_LORA_SYNCH_TIMEOUT (0x021B) #define RADIOLIB_LR11X0_CMD_SET_RANGING_ADDR (0x021C) #define RADIOLIB_LR11X0_CMD_SET_RANGING_REQ_ADDR (0x021D) #define RADIOLIB_LR11X0_CMD_GET_RANGING_RESULT (0x021E) #define RADIOLIB_LR11X0_CMD_SET_RANGING_TX_RX_DELAY (0x021F) #define RADIOLIB_LR11X0_CMD_SET_GFSK_CRC_PARAMS (0x0224) #define RADIOLIB_LR11X0_CMD_SET_GFSK_WHIT_PARAMS (0x0225) #define RADIOLIB_LR11X0_CMD_SET_RX_BOOSTED (0x0227) #define RADIOLIB_LR11X0_CMD_SET_RANGING_PARAMETER (0x0228) #define RADIOLIB_LR11X0_CMD_SET_RSSI_CALIBRATION (0x0229) #define RADIOLIB_LR11X0_CMD_SET_LORA_SYNC_WORD (0x022B) #define RADIOLIB_LR11X0_CMD_LR_FHSS_BUILD_FRAME (0x022C) #define RADIOLIB_LR11X0_CMD_LR_FHSS_SET_SYNC_WORD (0x022D) #define RADIOLIB_LR11X0_CMD_CONFIG_BLE_BEACON (0x022E) #define RADIOLIB_LR11X0_CMD_GET_LORA_RX_HEADER_INFOS (0x0230) #define RADIOLIB_LR11X0_CMD_BLE_BEACON_SEND (0x0231) #define RADIOLIB_LR11X0_CMD_WIFI_SCAN (0x0300) #define RADIOLIB_LR11X0_CMD_WIFI_SCAN_TIME_LIMIT (0x0301) #define RADIOLIB_LR11X0_CMD_WIFI_COUNTRY_CODE (0x0302) #define RADIOLIB_LR11X0_CMD_WIFI_COUNTRY_CODE_TIME_LIMIT (0x0303) #define RADIOLIB_LR11X0_CMD_WIFI_GET_NB_RESULTS (0x0305) #define RADIOLIB_LR11X0_CMD_WIFI_READ_RESULTS (0x0306) #define RADIOLIB_LR11X0_CMD_WIFI_RESET_CUMUL_TIMINGS (0x0307) #define RADIOLIB_LR11X0_CMD_WIFI_READ_CUMUL_TIMINGS (0x0308) #define RADIOLIB_LR11X0_CMD_WIFI_GET_NB_COUNTRY_CODE_RESULTS (0x0309) #define RADIOLIB_LR11X0_CMD_WIFI_READ_COUNTRY_CODE_RESULTS (0x030A) #define RADIOLIB_LR11X0_CMD_WIFI_CFG_TIMESTAMP_AP_PHONE (0x030B) #define RADIOLIB_LR11X0_CMD_WIFI_READ_VERSION (0x0320) #define RADIOLIB_LR11X0_CMD_GNSS_READ_RSSI (0x0222) #define RADIOLIB_LR11X0_CMD_GNSS_SET_CONSTELLATION_TO_USE (0x0400) #define RADIOLIB_LR11X0_CMD_GNSS_READ_CONSTELLATION_TO_USE (0x0401) #define RADIOLIB_LR11X0_CMD_GNSS_SET_ALMANAC_UPDATE (0x0402) #define RADIOLIB_LR11X0_CMD_GNSS_READ_ALMANAC_UPDATE (0x0403) #define RADIOLIB_LR11X0_CMD_GNSS_SET_FREQ_SEARCH_SPACE (0x0404) #define RADIOLIB_LR11X0_CMD_GNSS_READ_FREQ_SEARCH_SPACE (0x0405) #define RADIOLIB_LR11X0_CMD_GNSS_READ_VERSION (0x0406) #define RADIOLIB_LR11X0_CMD_GNSS_READ_SUPPORTED_CONSTELLATIONS (0x0407) #define RADIOLIB_LR11X0_CMD_GNSS_SET_MODE (0x0408) #define RADIOLIB_LR11X0_CMD_GNSS_AUTONOMOUS (0x0409) #define RADIOLIB_LR11X0_CMD_GNSS_ASSISTED (0x040A) #define RADIOLIB_LR11X0_CMD_GNSS_SCAN (0x040B) #define RADIOLIB_LR11X0_CMD_GNSS_GET_RESULT_SIZE (0x040C) #define RADIOLIB_LR11X0_CMD_GNSS_READ_RESULTS (0x040D) #define RADIOLIB_LR11X0_CMD_GNSS_ALMANAC_FULL_UPDATE (0x040E) #define RADIOLIB_LR11X0_CMD_GNSS_ALMANAC_READ_ADDR_SIZE (0x040F) #define RADIOLIB_LR11X0_CMD_GNSS_SET_ASSISTANCE_POSITION (0x0410) #define RADIOLIB_LR11X0_CMD_GNSS_READ_ASSISTANCE_POSITION (0x0411) #define RADIOLIB_LR11X0_CMD_GNSS_PUSH_SOLVER_MSG (0x0414) #define RADIOLIB_LR11X0_CMD_GNSS_PUSH_DM_MSG (0x0415) #define RADIOLIB_LR11X0_CMD_GNSS_GET_CONTEXT_STATUS (0x0416) #define RADIOLIB_LR11X0_CMD_GNSS_GET_NB_SV_DETECTED (0x0417) #define RADIOLIB_LR11X0_CMD_GNSS_GET_SV_DETECTED (0x0418) #define RADIOLIB_LR11X0_CMD_GNSS_GET_CONSUMPTION (0x0419) #define RADIOLIB_LR11X0_CMD_GNSS_READ_ALMANAC_PER_SATELLITE (0x041A) #define RADIOLIB_LR11X0_CMD_GNSS_GET_SV_VISIBLE (0x041F) #define RADIOLIB_LR11X0_CMD_GNSS_GET_SV_VISIBLE_DOPPLER (0x0420) #define RADIOLIB_LR11X0_CMD_GNSS_READ_LAST_SCAN_MODE_LAUNCHED (0x0426) #define RADIOLIB_LR11X0_CMD_GNSS_FETCH_TIME (0x0432) #define RADIOLIB_LR11X0_CMD_GNSS_READ_TIME (0x0434) #define RADIOLIB_LR11X0_CMD_GNSS_RESET_TIME (0x0435) #define RADIOLIB_LR11X0_CMD_GNSS_RESET_POSITION (0x0437) #define RADIOLIB_LR11X0_CMD_GNSS_READ_WEEK_NUMBER_ROLLOWER (0x0438) #define RADIOLIB_LR11X0_CMD_GNSS_READ_DEMOD_STATUS (0x0439) #define RADIOLIB_LR11X0_CMD_GNSS_READ_CUMUL_TIMING (0x044A) #define RADIOLIB_LR11X0_CMD_GNSS_SET_TIME (0x044B) #define RADIOLIB_LR11X0_CMD_GNSS_CONFIG_DELAY_RESET_AP (0x044D) #define RADIOLIB_LR11X0_CMD_GNSS_READ_DOPPLER_SOLVER_RES (0x044F) #define RADIOLIB_LR11X0_CMD_GNSS_READ_DELAY_RESET_AP (0x0453) #define RADIOLIB_LR11X0_CMD_GNSS_ALMANAC_UPDATE_FROM_SAT (0x0454) #define RADIOLIB_LR11X0_CMD_GNSS_READ_KEEP_SYNC_STATUS (0x0456) #define RADIOLIB_LR11X0_CMD_GNSS_READ_ALMANAC_STATUS (0x0457) #define RADIOLIB_LR11X0_CMD_GNSS_CONFIG_ALMANAC_UPDATE_PERIOD (0x0463) #define RADIOLIB_LR11X0_CMD_GNSS_READ_ALMANAC_UPDATE_PERIOD (0x0464) #define RADIOLIB_LR11X0_CMD_GNSS_GET_SV_WARM_START (0x0466) #define RADIOLIB_LR11X0_CMD_GNSS_GET_SV_SYNC (0x0466) #define RADIOLIB_LR11X0_CMD_GNSS_READ_WARM_START_STATUS (0x0469) #define RADIOLIB_LR11X0_CMD_GNSS_WRITE_BIT_MASK_SAT_ACTIVATED (0x0472) #define RADIOLIB_LR11X0_CMD_CRYPTO_SET_KEY (0x0502) #define RADIOLIB_LR11X0_CMD_CRYPTO_DERIVE_KEY (0x0503) #define RADIOLIB_LR11X0_CMD_CRYPTO_PROCESS_JOIN_ACCEPT (0x0504) #define RADIOLIB_LR11X0_CMD_CRYPTO_COMPUTE_AES_CMAC (0x0505) #define RADIOLIB_LR11X0_CMD_CRYPTO_VERIFY_AES_CMAC (0x0506) #define RADIOLIB_LR11X0_CMD_CRYPTO_AES_ENCRYPT_01 (0x0507) #define RADIOLIB_LR11X0_CMD_CRYPTO_AES_ENCRYPT (0x0508) #define RADIOLIB_LR11X0_CMD_CRYPTO_AES_DECRYPT (0x0509) #define RADIOLIB_LR11X0_CMD_CRYPTO_STORE_TO_FLASH (0x050A) #define RADIOLIB_LR11X0_CMD_CRYPTO_RESTORE_FROM_FLASH (0x050B) #define RADIOLIB_LR11X0_CMD_CRYPTO_SET_PARAM (0x050D) #define RADIOLIB_LR11X0_CMD_CRYPTO_GET_PARAM (0x050E) #define RADIOLIB_LR11X0_CMD_CRYPTO_CHECK_ENCRYPTED_FIRMWARE_IMAGE (0x050F) #define RADIOLIB_LR11X0_CMD_CRYPTO_CHECK_ENCRYPTED_FIRMWARE_IMAGE_RESULT (0x0510) #define RADIOLIB_LR11X0_CMD_BOOT_ERASE_FLASH (0x8000) #define RADIOLIB_LR11X0_CMD_BOOT_WRITE_FLASH_ENCRYPTED (0x8003) #define RADIOLIB_LR11X0_CMD_BOOT_GET_HASH (0x8004) #define RADIOLIB_LR11X0_CMD_BOOT_REBOOT (0x8005) #define RADIOLIB_LR11X0_CMD_BOOT_GET_PIN (0x800B) #define RADIOLIB_LR11X0_CMD_BOOT_GET_CHIP_EUI (0x800C) #define RADIOLIB_LR11X0_CMD_BOOT_GET_JOIN_EUI (0x800D) // LR11X0 SPI command variables // RADIOLIB_LR11X0_CMD_GET_STATUS MSB LSB DESCRIPTION #define RADIOLIB_LR11X0_STAT_1_CMD_FAIL (0x00UL << 1) // 3 1 command status: last command could not be executed #define RADIOLIB_LR11X0_STAT_1_CMD_PERR (0x01UL << 1) // 3 1 processing error #define RADIOLIB_LR11X0_STAT_1_CMD_OK (0x02UL << 1) // 3 1 successfully processed #define RADIOLIB_LR11X0_STAT_1_CMD_DAT (0x03UL << 1) // 3 1 successfully processed, data is being transmitted #define RADIOLIB_LR11X0_STAT_1_IRQ_INACTIVE (0x00UL << 0) // 0 0 interrupt status: inactive #define RADIOLIB_LR11X0_STAT_1_IRQ_ACTIVE (0x01UL << 0) // 0 0 at least 1 interrupt active #define RADIOLIB_LR11X0_STAT_2_CMD_RST_CLEARED (0x00UL << 4) // 7 4 reset status: cleared #define RADIOLIB_LR11X0_STAT_2_CMD_RST_ANALOG (0x01UL << 4) // 7 4 analog (power on, brown-out) #define RADIOLIB_LR11X0_STAT_2_CMD_RST_EXTERNAL (0x02UL << 4) // 7 4 NRESET pin #define RADIOLIB_LR11X0_STAT_2_CMD_RST_SYSTEM (0x03UL << 4) // 7 4 system #define RADIOLIB_LR11X0_STAT_2_CMD_RST_WATCHDOG (0x04UL << 4) // 7 4 watchdog #define RADIOLIB_LR11X0_STAT_2_CMD_RST_WAKEUP (0x05UL << 4) // 7 4 NSS toggling wake-up #define RADIOLIB_LR11X0_STAT_2_CMD_RST_RTC (0x06UL << 4) // 7 4 realtime clock #define RADIOLIB_LR11X0_STAT_2_MODE_SLEEP (0x00UL << 1) // 3 1 chip mode: sleep #define RADIOLIB_LR11X0_STAT_2_MODE_STBY_RC (0x01UL << 1) // 3 1 standby with RC oscillator #define RADIOLIB_LR11X0_STAT_2_MODE_STBY_OSC (0x02UL << 1) // 3 1 standby with external oscillator #define RADIOLIB_LR11X0_STAT_2_MODE_FS (0x03UL << 1) // 3 1 frequency synthesis #define RADIOLIB_LR11X0_STAT_2_MODE_RX (0x04UL << 1) // 3 1 receive #define RADIOLIB_LR11X0_STAT_2_MODE_TX (0x05UL << 1) // 3 1 transmit #define RADIOLIB_LR11X0_STAT_2_MODE_WIFI_GNSS (0x06UL << 1) // 3 1 WiFi or GNSS geolocation #define RADIOLIB_LR11X0_STAT_2_BOOT (0x00UL << 0) // 0 0 code executed from: bootloader #define RADIOLIB_LR11X0_STAT_2_FLASH (0x01UL << 0) // 0 0 flash // RADIOLIB_LR11X0_CMD_WRITE_REG_MEM #define RADIOLIB_LR11X0_SPI_MAX_READ_WRITE_LEN (256) // 7 0 maximum length of read/write SPI payload in bytes // RADIOLIB_LR11X0_CMD_GET_VERSION #define RADIOLIB_LR11X0_DEVICE_LR1110 (0x01UL << 0) // 7 0 HW device: LR1110 #define RADIOLIB_LR11X0_DEVICE_LR1120 (0x02UL << 0) // 7 0 LR1120 #define RADIOLIB_LR11X0_DEVICE_LR1121 (0x03UL << 0) // 7 0 LR1121 #define RADIOLIB_LR11X0_DEVICE_BOOT (0xDFUL << 0) // 7 0 bootloader mode // RADIOLIB_LR11X0_CMD_GET_ERRORS #define RADIOLIB_LR11X0_ERROR_STAT_LF_RC_CALIB_ERR (0x01UL << 0) // 15 0 error: low frequency RC not calibrated #define RADIOLIB_LR11X0_ERROR_STAT_HF_RC_CALIB_ERR (0x01UL << 1) // 15 0 high frequency RC not calibrated #define RADIOLIB_LR11X0_ERROR_STAT_ADC_CALIB_ERR (0x01UL << 2) // 15 0 ADC not calibrated #define RADIOLIB_LR11X0_ERROR_STAT_PLL_CALIB_ERR (0x01UL << 3) // 15 0 PLL not calibrated #define RADIOLIB_LR11X0_ERROR_STAT_IMG_CALIB_ERR (0x01UL << 4) // 15 0 image rejection not calibrated #define RADIOLIB_LR11X0_ERROR_STAT_HF_XOSC_START_ERR (0x01UL << 5) // 15 0 high frequency oscillator failed to start #define RADIOLIB_LR11X0_ERROR_STAT_LF_XOSC_START_ERR (0x01UL << 6) // 15 0 low frequency oscillator failed to start #define RADIOLIB_LR11X0_ERROR_STAT_PLL_LOCK_ERR (0x01UL << 7) // 15 0 PLL failed to lock #define RADIOLIB_LR11X0_ERROR_STAT_RX_ADC_OFFSET_ERR (0x01UL << 8) // 15 0 ADC offset not calibrated // RADIOLIB_LR11X0_CMD_CALIBRATE #define RADIOLIB_LR11X0_CALIBRATE_PLL_TX (0x01UL << 5) // 5 5 calibrate: Tx PLL #define RADIOLIB_LR11X0_CALIBRATE_IMG (0x01UL << 4) // 4 4 image rejection #define RADIOLIB_LR11X0_CALIBRATE_ADC (0x01UL << 3) // 3 3 A/D converter #define RADIOLIB_LR11X0_CALIBRATE_PLL (0x01UL << 2) // 2 2 PLL #define RADIOLIB_LR11X0_CALIBRATE_HF_RC (0x01UL << 1) // 1 1 high frequency RC #define RADIOLIB_LR11X0_CALIBRATE_LF_RC (0x01UL << 0) // 0 0 low frequency RC #define RADIOLIB_LR11X0_CALIBRATE_ALL (0x3FUL << 0) // 5 0 everything #define RADIOLIB_LR11X0_CAL_IMG_FREQ_TRIG_MHZ (20.0f) // RADIOLIB_LR11X0_CMD_SET_REG_MODE #define RADIOLIB_LR11X0_REG_MODE_LDO (0x00UL << 0) // 0 0 regulator mode: LDO in all modes #define RADIOLIB_LR11X0_REG_MODE_DC_DC (0x01UL << 0) // 0 0 DC-DC and LDO // RADIOLIB_LR11X0_CMD_SET_DIO_AS_RF_SWITCH #define RADIOLIB_LR11X0_RFSW_DIO5_ENABLED (0x01UL << 0) // 4 0 RF switch: DIO5 enabled #define RADIOLIB_LR11X0_RFSW_DIO5_DISABLED (0x00UL << 0) // 4 0 DIO5 disabled (default) #define RADIOLIB_LR11X0_RFSW_DIO6_ENABLED (0x01UL << 1) // 4 0 RF switch: DIO6 enabled #define RADIOLIB_LR11X0_RFSW_DIO6_DISABLED (0x00UL << 1) // 4 0 DIO6 disabled (default) #define RADIOLIB_LR11X0_RFSW_DIO7_ENABLED (0x01UL << 2) // 4 0 RF switch: DIO7 enabled #define RADIOLIB_LR11X0_RFSW_DIO7_DISABLED (0x00UL << 2) // 4 0 DIO7 disabled (default) #define RADIOLIB_LR11X0_RFSW_DIO8_ENABLED (0x01UL << 3) // 4 0 RF switch: DIO8 enabled #define RADIOLIB_LR11X0_RFSW_DIO8_DISABLED (0x00UL << 3) // 4 0 DIO8 disabled (default) #define RADIOLIB_LR11X0_RFSW_DIO10_ENABLED (0x01UL << 4) // 4 0 RF switch: DIO10 enabled #define RADIOLIB_LR11X0_RFSW_DIO10_DISABLED (0x00UL << 4) // 4 0 DIO10 disabled (default) #define RADIOLIB_LR11X0_DIOx(X) ((X) | RFSWITCH_PIN_FLAG) #define RADIOLIB_LR11X0_DIOx_VAL(X) ((X) & ~RFSWITCH_PIN_FLAG) #define RADIOLIB_LR11X0_DIO5 (RADIOLIB_LR11X0_DIOx(0)) #define RADIOLIB_LR11X0_DIO6 (RADIOLIB_LR11X0_DIOx(1)) #define RADIOLIB_LR11X0_DIO7 (RADIOLIB_LR11X0_DIOx(2)) #define RADIOLIB_LR11X0_DIO8 (RADIOLIB_LR11X0_DIOx(3)) #define RADIOLIB_LR11X0_DIO10 (RADIOLIB_LR11X0_DIOx(4)) // RADIOLIB_LR11X0_CMD_SET_DIO_IRQ_PARAMS #define RADIOLIB_LR11X0_IRQ_TX_DONE (0x01UL << 2) // 31 0 interrupt: packet transmitted #define RADIOLIB_LR11X0_IRQ_RX_DONE (0x01UL << 3) // 31 0 packet received #define RADIOLIB_LR11X0_IRQ_PREAMBLE_DETECTED (0x01UL << 4) // 31 0 preamble detected #define RADIOLIB_LR11X0_IRQ_SYNC_WORD_HEADER_VALID (0x01UL << 5) // 31 0 sync word or LoRa header valid #define RADIOLIB_LR11X0_IRQ_HEADER_ERR (0x01UL << 6) // 31 0 LoRa header CRC error #define RADIOLIB_LR11X0_IRQ_CRC_ERR (0x01UL << 7) // 31 0 packet CRC error #define RADIOLIB_LR11X0_IRQ_CAD_DONE (0x01UL << 8) // 31 0 CAD completed #define RADIOLIB_LR11X0_IRQ_CAD_DETECTED (0x01UL << 9) // 31 0 CAD detected #define RADIOLIB_LR11X0_IRQ_TIMEOUT (0x01UL << 10) // 31 0 Rx or Tx timeout #define RADIOLIB_LR11X0_IRQ_LR_FHSS_HOP (0x01UL << 11) // 31 0 FHSS hop #define RADIOLIB_LR11X0_IRQ_GNSS_DONE (0x01UL << 19) // 31 0 GNSS scan finished #define RADIOLIB_LR11X0_IRQ_WIFI_DONE (0x01UL << 20) // 31 0 WiFi scan finished #define RADIOLIB_LR11X0_IRQ_LBD (0x01UL << 21) // 31 0 low battery detected #define RADIOLIB_LR11X0_IRQ_CMD_ERROR (0x01UL << 22) // 31 0 command error #define RADIOLIB_LR11X0_IRQ_ERROR (0x01UL << 23) // 31 0 some other error than CMD_ERR #define RADIOLIB_LR11X0_IRQ_FSK_LEN_ERROR (0x01UL << 24) // 31 0 FSK packet received with length error #define RADIOLIB_LR11X0_IRQ_FSK_ADDR_ERROR (0x01UL << 25) // 31 0 FSK packet received with address error #define RADIOLIB_LR11X0_IRQ_LORA_RX_TIMESTAMP (0x01UL << 27) // 31 0 last LoRa symbol was received (timestamp source) #define RADIOLIB_LR11X0_IRQ_GNSS_ABORT (0x01UL << 28) // 31 0 GNSS scan aborted #define RADIOLIB_LR11X0_IRQ_ALL (0x1BF80FFCUL) // 31 0 all interrupts #define RADIOLIB_LR11X0_IRQ_NONE (0x00UL << 0) // 31 0 no interrupts // RADIOLIB_LR11X0_CMD_CONFIG_LF_CLOCK #define RADIOLIB_LR11X0_LF_CLK_RC (0x00UL << 0) // 1 0 32.768 kHz source: RC oscillator #define RADIOLIB_LR11X0_LF_CLK_XOSC (0x01UL << 0) // 1 0 crystal oscillator #define RADIOLIB_LR11X0_LF_CLK_EXT (0x02UL << 0) // 1 0 external signal on DIO11 #define RADIOLIB_LR11X0_LF_BUSY_RELEASE_DISABLED (0x00UL << 2) // 2 2 #define RADIOLIB_LR11X0_LF_BUSY_RELEASE_ENABLED (0x01UL << 2) // 2 2 // RADIOLIB_LR11X0_CMD_SET_TCXO_MODE #define RADIOLIB_LR11X0_TCXO_VOLTAGE_1_6 (0x00UL << 0) // 2 0 TCXO supply voltage: 1.6V #define RADIOLIB_LR11X0_TCXO_VOLTAGE_1_7 (0x01UL << 0) // 2 0 1.7V #define RADIOLIB_LR11X0_TCXO_VOLTAGE_1_8 (0x02UL << 0) // 2 0 1.8V #define RADIOLIB_LR11X0_TCXO_VOLTAGE_2_2 (0x03UL << 0) // 2 0 2.2V #define RADIOLIB_LR11X0_TCXO_VOLTAGE_2_4 (0x04UL << 0) // 2 0 2.4V #define RADIOLIB_LR11X0_TCXO_VOLTAGE_2_7 (0x05UL << 0) // 2 0 2.7V #define RADIOLIB_LR11X0_TCXO_VOLTAGE_3_0 (0x06UL << 0) // 2 0 3.0V #define RADIOLIB_LR11X0_TCXO_VOLTAGE_3_3 (0x07UL << 0) // 2 0 3.3V // RADIOLIB_LR11X0_CMD_SET_SLEEP #define RADIOLIB_LR11X0_SLEEP_RETENTION_DISABLED (0x00UL << 0) // 0 0 configuration retention in sleep mode: disabled #define RADIOLIB_LR11X0_SLEEP_RETENTION_ENABLED (0x01UL << 0) // 0 0 enabled #define RADIOLIB_LR11X0_SLEEP_WAKEUP_DISABLED (0x00UL << 0) // 1 1 automated wakeup: disabled #define RADIOLIB_LR11X0_SLEEP_WAKEUP_ENABLED (0x01UL << 0) // 1 1 enabled // RADIOLIB_LR11X0_CMD_SET_STANDBY #define RADIOLIB_LR11X0_STANDBY_RC (0x00UL << 0) // 7 0 standby mode: RC oscillator #define RADIOLIB_LR11X0_STANDBY_XOSC (0x00UL << 0) // 7 0 XTAL/TCXO oscillator // RADIOLIB_LR11X0_CMD_ERASE_INFO_PAGE #define RADIOLIB_LR11X0_INFO_PAGE (1) // RADIOLIB_LR11X0_CMD_GET_CHIP_EUI #define RADIOLIB_LR11X0_EUI_LEN (8) // RADIOLIB_LR11X0_CMD_GET_HASH #define RADIOLIB_LR11X0_HASH_LEN (10) // RADIOLIB_LR11X0_CMD_DERIVE_ROOT_KEYS_AND_GET_PIN #define RADIOLIB_LR11X0_PIN_LEN (4) // RADIOLIB_LR11X0_CMD_GET_PACKET_STATUS #define RADIOLIB_LR11X0_RX_STATUS_ADDR_ERR (0x01UL << 5) // 7 0 Rx status: address filtering error #define RADIOLIB_LR11X0_RX_STATUS_CRC_ERR (0x01UL << 4) // 7 0 CRC error #define RADIOLIB_LR11X0_RX_STATUS_LEN_ERR (0x01UL << 3) // 7 0 length filtering error #define RADIOLIB_LR11X0_RX_STATUS_ABORTED (0x01UL << 2) // 7 0 packet reception aborted #define RADIOLIB_LR11X0_RX_STATUS_PACKET_RECEIVED (0x01UL << 1) // 7 0 packet received #define RADIOLIB_LR11X0_RX_STATUS_PACKET_SENT (0x01UL << 0) // 7 0 packet sent // RADIOLIB_LR11X0_CMD_SET_GFSK_SYNC_WORD #define RADIOLIB_LR11X0_GFSK_SYNC_WORD_LEN (8) // RADIOLIB_LR11X0_CMD_SET_LORA_PUBLIC_NETWORK #define RADIOLIB_LR11X0_LORA_PRIVATE_NETWORK (0x00UL << 0) // 7 0 LoRa sync word: private network #define RADIOLIB_LR11X0_LORA_PUBLIC_NETWORK (0x01UL << 0) // 7 0 public network // RADIOLIB_LR11X0_CMD_SET_RX #define RADIOLIB_LR11X0_RX_TIMEOUT_NONE (0x000000UL) // 23 0 Rx timeout duration: no timeout (Rx single mode) #define RADIOLIB_LR11X0_RX_TIMEOUT_INF (0xFFFFFFUL) // 23 0 infinite (Rx continuous mode) // RADIOLIB_LR11X0_CMD_SET_TX #define RADIOLIB_LR11X0_TX_TIMEOUT_NONE (0x000000UL) // 23 0 disable Tx timeout // RADIOLIB_LR11X0_CMD_AUTO_TX_RX #define RADIOLIB_LR11X0_AUTO_TX_RX_DISABLED (0xFFFFFFUL) // 23 0 disable auto Tx/Rx mode #define RADIOLIB_LR11X0_AUTO_TX_RX_SKIP_INT (0x000000UL) // 23 0 skip intermediary mode #define RADIOLIB_LR11X0_AUTO_INTERMEDIARY_MODE_SLEEP (0x00UL << 0) // 1 0 intermediary mode: sleep #define RADIOLIB_LR11X0_AUTO_INTERMEDIARY_MODE_STBY_RC (0x01UL << 0) // 1 0 standby with RC #define RADIOLIB_LR11X0_AUTO_INTERMEDIARY_MODE_STBY_XOSC (0x02UL << 0) // 1 0 standby with XOSC #define RADIOLIB_LR11X0_AUTO_INTERMEDIARY_MODE_FS (0x03UL << 0) // 1 0 frequency synthesis #define RADIOLIB_LR11X0_AUTO_TX_RX_TIMEOUT_DISABLED (0x000000UL) // 23 0 disable timeout of the second mode // RADIOLIB_LR11X0_CMD_SET_CAD_PARAMS #define RADIOLIB_LR11X0_CAD_EXIT_MODE_STBY_RC (0x00UL << 0) // 7 0 mode to set after CAD: standby with RC #define RADIOLIB_LR11X0_CAD_EXIT_MODE_RX (0x01UL << 0) // 7 0 receive if activity detected #define RADIOLIB_LR11X0_CAD_EXIT_MODE_LBT (0x10UL << 0) // 7 0 transmit if no activity detected #define RADIOLIB_LR11X0_CAD_PARAM_DEFAULT (0xFFUL << 0) // 7 0 used by the CAD methods to specify default parameter value // RADIOLIB_LR11X0_CMD_SET_PACKET_TYPE #define RADIOLIB_LR11X0_PACKET_TYPE_NONE (0x00UL << 0) // 2 0 packet type: none #define RADIOLIB_LR11X0_PACKET_TYPE_GFSK (0x01UL << 0) // 2 0 (G)FSK #define RADIOLIB_LR11X0_PACKET_TYPE_LORA (0x02UL << 0) // 2 0 LoRa #define RADIOLIB_LR11X0_PACKET_TYPE_SIGFOX (0x03UL << 0) // 2 0 Sigfox #define RADIOLIB_LR11X0_PACKET_TYPE_LR_FHSS (0x04UL << 0) // 2 0 GMSK/LR-FHSS #define RADIOLIB_LR11X0_PACKET_TYPE_RANGING (0x05UL << 0) // 2 0 ranging #define RADIOLIB_LR11X0_PACKET_TYPE_BLE (0x06UL << 0) // 2 0 BLE beacon // RADIOLIB_LR11X0_CMD_SET_MODULATION_PARAMS #define RADIOLIB_LR11X0_LORA_BW_62_5 (0x03UL << 0) // 7 0 LoRa bandwidth: 62.5 kHz #define RADIOLIB_LR11X0_LORA_BW_125_0 (0x04UL << 0) // 7 0 125.0 kHz #define RADIOLIB_LR11X0_LORA_BW_250_0 (0x05UL << 0) // 7 0 250.0 kHz #define RADIOLIB_LR11X0_LORA_BW_500_0 (0x06UL << 0) // 7 0 500.0 kHz #define RADIOLIB_LR11X0_LORA_BW_203_125 (0x0DUL << 0) // 7 0 203.0 kHz (2.4GHz only) #define RADIOLIB_LR11X0_LORA_BW_406_25 (0x0EUL << 0) // 7 0 406.0 kHz (2.4GHz only) #define RADIOLIB_LR11X0_LORA_BW_812_50 (0x0FUL << 0) // 7 0 812.0 kHz (2.4GHz only) #define RADIOLIB_LR11X0_LORA_CR_4_5_SHORT (0x01UL << 0) // 7 0 coding rate: 4/5 with short interleaver #define RADIOLIB_LR11X0_LORA_CR_4_6_SHORT (0x02UL << 0) // 7 0 4/6 with short interleaver #define RADIOLIB_LR11X0_LORA_CR_4_7_SHORT (0x03UL << 0) // 7 0 4/7 with short interleaver #define RADIOLIB_LR11X0_LORA_CR_4_8_SHORT (0x04UL << 0) // 7 0 4/8 with short interleaver #define RADIOLIB_LR11X0_LORA_CR_4_5_LONG (0x05UL << 0) // 7 0 4/5 with long interleaver #define RADIOLIB_LR11X0_LORA_CR_4_6_LONG (0x06UL << 0) // 7 0 4/6 with long interleaver #define RADIOLIB_LR11X0_LORA_CR_4_8_LONG (0x07UL << 0) // 7 0 4/8 with long interleaver #define RADIOLIB_LR11X0_LORA_LDRO_DISABLED (0x00UL << 0) // 7 0 low data rate optimize: disabled #define RADIOLIB_LR11X0_LORA_LDRO_ENABLED (0x01UL << 0) // 7 0 enabled #define RADIOLIB_LR11X0_GFSK_BIT_RATE_DIV_DISABLED (0x00UL << 31) // 31 0 divide bit rate value by 256: disabled #define RADIOLIB_LR11X0_GFSK_BIT_RATE_DIV_ENABLED (0x01UL << 31) // 31 0 enabled #define RADIOLIB_LR11X0_GFSK_SHAPING_NONE (0x00UL << 0) // 7 0 shaping filter: none #define RADIOLIB_LR11X0_GFSK_SHAPING_GAUSSIAN_BT_0_3 (0x08UL << 0) // 7 0 Gaussian, BT = 0.3 #define RADIOLIB_LR11X0_GFSK_SHAPING_GAUSSIAN_BT_0_5 (0x09UL << 0) // 7 0 Gaussian, BT = 0.5 #define RADIOLIB_LR11X0_GFSK_SHAPING_GAUSSIAN_BT_0_7 (0x0AUL << 0) // 7 0 Gaussian, BT = 0.7 #define RADIOLIB_LR11X0_GFSK_SHAPING_GAUSSIAN_BT_1_0 (0x0BUL << 0) // 7 0 Gaussian, BT = 1.0 #define RADIOLIB_LR11X0_GFSK_SHAPING_RAISED_COSINE_BT_0_7 (0x16UL << 0) // 7 0 raised cosine, BT = 0.7 #define RADIOLIB_LR11X0_GFSK_RX_BW_4_8 (0x1FUL << 0) // 7 0 GFSK Rx bandwidth: 4.8 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_5_8 (0x17UL << 0) // 7 0 5.8 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_7_3 (0x0FUL << 0) // 7 0 7.3 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_9_7 (0x1EUL << 0) // 7 0 9.7 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_11_7 (0x16UL << 0) // 7 0 11.7 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_14_6 (0x0EUL << 0) // 7 0 14.6 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_19_5 (0x1DUL << 0) // 7 0 19.5 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_23_4 (0x15UL << 0) // 7 0 23.4 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_29_3 (0x0DUL << 0) // 7 0 29.3 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_39_0 (0x1CUL << 0) // 7 0 39.0 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_46_9 (0x14UL << 0) // 7 0 46.9 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_58_6 (0x0CUL << 0) // 7 0 58.6 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_78_2 (0x1BUL << 0) // 7 0 78.2 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_93_8 (0x13UL << 0) // 7 0 93.8 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_117_3 (0x0BUL << 0) // 7 0 117.3 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_156_2 (0x1AUL << 0) // 7 0 156.2 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_187_2 (0x12UL << 0) // 7 0 187.2 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_234_3 (0x0AUL << 0) // 7 0 234.3 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_312_0 (0x19UL << 0) // 7 0 312.0 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_373_6 (0x11UL << 0) // 7 0 373.6 kHz #define RADIOLIB_LR11X0_GFSK_RX_BW_467_0 (0x09UL << 0) // 7 0 467.0 kHz #define RADIOLIB_LR11X0_LR_FHSS_BIT_RATE (488.28215f) // 31 0 LR FHSS bit rate: 488.28215 bps #define RADIOLIB_LR11X0_LR_FHSS_BIT_RATE_RAW (0x8001E848UL) // 31 0 488.28215 bps in raw #define RADIOLIB_LR11X0_LR_FHSS_SHAPING_GAUSSIAN_BT_1_0 (0x0BUL << 0) // 7 0 shaping filter: Gaussian, BT = 1.0 #define RADIOLIB_LR11X0_SIGFOX_SHAPING_GAUSSIAN_BT_0_7 (0x16UL << 0) // 7 0 shaping filter: Gaussian, BT = 0.7 // RADIOLIB_LR11X0_CMD_SET_PACKET_PARAMS #define RADIOLIB_LR11X0_LORA_HEADER_EXPLICIT (0x00UL << 0) // 7 0 LoRa header mode: explicit #define RADIOLIB_LR11X0_LORA_HEADER_IMPLICIT (0x01UL << 0) // 7 0 implicit #define RADIOLIB_LR11X0_LORA_PAYLOAD_LEN_ANY (0x00UL << 0) // 7 0 accept any payload length #define RADIOLIB_LR11X0_LORA_CRC_ENABLED (0x01UL << 0) // 7 0 CRC: enabled #define RADIOLIB_LR11X0_LORA_CRC_DISABLED (0x00UL << 0) // 7 0 disabled #define RADIOLIB_LR11X0_LORA_IQ_STANDARD (0x00UL << 0) // 7 0 IQ setup: standard #define RADIOLIB_LR11X0_LORA_IQ_INVERTED (0x01UL << 0) // 7 0 inverted #define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_DISABLED (0x00UL << 0) // 7 0 preamble detector: disabled #define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_8_BITS (0x04UL << 0) // 7 0 8 bits #define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_16_BITS (0x05UL << 0) // 7 0 16 bits #define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_24_BITS (0x06UL << 0) // 7 0 24 bits #define RADIOLIB_LR11X0_GFSK_PREAMBLE_DETECT_32_BITS (0x07UL << 0) // 7 0 32 bits #define RADIOLIB_LR11X0_GFSK_ADDR_FILTER_DISABLED (0x00UL << 0) // 7 0 address filtering: disabled #define RADIOLIB_LR11X0_GFSK_ADDR_FILTER_NODE (0x01UL << 0) // 7 0 node address #define RADIOLIB_LR11X0_GFSK_ADDR_FILTER_NODE_BROADCAST (0x02UL << 0) // 7 0 node and broadcast address #define RADIOLIB_LR11X0_GFSK_PACKET_LENGTH_FIXED (0x00UL << 0) // 7 0 packet length: fixed #define RADIOLIB_LR11X0_GFSK_PACKET_LENGTH_VARIABLE (0x01UL << 0) // 7 0 variable #define RADIOLIB_LR11X0_GFSK_PACKET_LENGTH_VARIABLE_SX128X (0x02UL << 0) // 7 0 variable, SX128x 9-bit length encoding #define RADIOLIB_LR11X0_GFSK_PAYLOAD_LEN_ANY (0x00UL << 0) // 7 0 accept any payload length #define RADIOLIB_LR11X0_GFSK_CRC_DISABLED (0x01UL << 0) // 7 0 CRC: disabled #define RADIOLIB_LR11X0_GFSK_CRC_1_BYTE (0x00UL << 0) // 7 0 1-byte #define RADIOLIB_LR11X0_GFSK_CRC_2_BYTE (0x02UL << 0) // 7 0 2-byte #define RADIOLIB_LR11X0_GFSK_CRC_1_BYTE_INV (0x04UL << 0) // 7 0 1-byte, inverted #define RADIOLIB_LR11X0_GFSK_CRC_2_BYTE_INV (0x06UL << 0) // 7 0 2-byte, inverted #define RADIOLIB_LR11X0_GFSK_WHITENING_DISABLED (0x00UL << 0) // 7 0 whitening: disabled #define RADIOLIB_LR11X0_GFSK_WHITENING_ENABLED (0x01UL << 0) // 7 0 enabled // RADIOLIB_LR11X0_CMD_SET_TX_PARAMS #define RADIOLIB_LR11X0_PA_RAMP_16U (0x00UL << 0) // 7 0 PA ramp time: 16 us #define RADIOLIB_LR11X0_PA_RAMP_32U (0x01UL << 0) // 7 0 32 us #define RADIOLIB_LR11X0_PA_RAMP_48U (0x02UL << 0) // 7 0 48 us #define RADIOLIB_LR11X0_PA_RAMP_64U (0x03UL << 0) // 7 0 64 us #define RADIOLIB_LR11X0_PA_RAMP_80U (0x04UL << 0) // 7 0 80 us #define RADIOLIB_LR11X0_PA_RAMP_96U (0x05UL << 0) // 7 0 96 us #define RADIOLIB_LR11X0_PA_RAMP_112U (0x06UL << 0) // 7 0 112 us #define RADIOLIB_LR11X0_PA_RAMP_128U (0x07UL << 0) // 7 0 128 us #define RADIOLIB_LR11X0_PA_RAMP_144U (0x08UL << 0) // 7 0 144 us #define RADIOLIB_LR11X0_PA_RAMP_160U (0x09UL << 0) // 7 0 160 us #define RADIOLIB_LR11X0_PA_RAMP_176U (0x0AUL << 0) // 7 0 176 us #define RADIOLIB_LR11X0_PA_RAMP_192U (0x0BUL << 0) // 7 0 192 us #define RADIOLIB_LR11X0_PA_RAMP_208U (0x0CUL << 0) // 7 0 208 us #define RADIOLIB_LR11X0_PA_RAMP_240U (0x0DUL << 0) // 7 0 240 us #define RADIOLIB_LR11X0_PA_RAMP_272U (0x0EUL << 0) // 7 0 272 us #define RADIOLIB_LR11X0_PA_RAMP_304U (0x0FUL << 0) // 7 0 304 us // RADIOLIB_LR11X0_CMD_SET_RX_TX_FALLBACK_MODE #define RADIOLIB_LR11X0_FALLBACK_MODE_STBY_RC (0x01UL << 0) // 1 0 fallback mode after Rx/Tx: standby with RC #define RADIOLIB_LR11X0_FALLBACK_MODE_STBY_XOSC (0x02UL << 0) // 1 0 standby with XOSC #define RADIOLIB_LR11X0_FALLBACK_MODE_FS (0x03UL << 0) // 1 0 frequency synthesis // RADIOLIB_LR11X0_CMD_SET_RX_DUTY_CYCLE #define RADIOLIB_LR11X0_RX_DUTY_CYCLE_MODE_RX (0x00UL << 0) // 0 0 mode in Rx windows: Rx (default) #define RADIOLIB_LR11X0_RX_DUTY_CYCLE_MODE_CAD (0x01UL << 0) // 0 0 CAD #define RADIOLIB_LR11X0_TIMING_STEP (1.0f/32768.0f) // 23 0 timing step fo delays // RADIOLIB_LR11X0_CMD_SET_PA_CONFIG #define RADIOLIB_LR11X0_PA_SEL_LP (0x00UL << 0) // 7 0 PA select: low power PA #define RADIOLIB_LR11X0_PA_SEL_HP (0x01UL << 0) // 7 0 high power PA #define RADIOLIB_LR11X0_PA_SEL_HF (0x02UL << 0) // 7 0 high frequency PA #define RADIOLIB_LR11X0_PA_SUPPLY_INTERNAL (0x00UL << 0) // 7 0 PA power source: internal #define RADIOLIB_LR11X0_PA_SUPPLY_VBAT (0x01UL << 0) // 7 0 VBAT (required for >= 14 dBm) // RADIOLIB_LR11X0_CMD_STOP_TIMEOUT_ON_PREAMBLE #define RADIOLIB_LR11X0_STOP_ON_SYNC_HEADER (0x00UL << 0) // 0 0 stop timeout on: sync word or header (default) #define RADIOLIB_LR11X0_STOP_ON_PREAMBLE (0x01UL << 0) // 0 0 preamble // RADIOLIB_LR11X0_CMD_GET_RANGING_RESULT #define RADIOLIB_LR11X0_RANGING_RESULT_DISTANCE (0) // 7 0 ranging result type: distance #define RADIOLIB_LR11X0_RANGING_RESULT_RSSI (1) // 7 0 RSSI // RADIOLIB_LR11X0_CMD_SET_RX_BOOSTED #define RADIOLIB_LR11X0_RX_BOOSTED_ENABLED (0x01UL << 0) // 0 0 Rx boosted mode: enabled #define RADIOLIB_LR11X0_RX_BOOSTED_DISABLED (0x00UL << 0) // 0 0 disabled // RADIOLIB_LR11X0_CMD_SET_LORA_SYNC_WORD #define RADIOLIB_LR11X0_LORA_SYNC_WORD_PRIVATE (0x12) #define RADIOLIB_LR11X0_LORA_SYNC_WORD_PUBLIC (0x34) // RADIOLIB_LR11X0_CMD_LR_FHSS_BUILD_FRAME #define RADIOLIB_LR11X0_LR_FHSS_CR_5_6 (0x00UL << 0) // 7 0 LR FHSS coding rate: 5/6 #define RADIOLIB_LR11X0_LR_FHSS_CR_2_3 (0x01UL << 0) // 7 0 2/3 #define RADIOLIB_LR11X0_LR_FHSS_CR_1_2 (0x02UL << 0) // 7 0 1/2 #define RADIOLIB_LR11X0_LR_FHSS_CR_1_3 (0x03UL << 0) // 7 0 1/3 #define RADIOLIB_LR11X0_LR_FHSS_MOD_TYPE_GMSK (0x00UL << 0) // 7 0 LR FHSS modulation: GMSK #define RADIOLIB_LR11X0_LR_FHSS_GRID_STEP_FCC (0x00UL << 0) // 7 0 LR FHSS step size: 25.390625 kHz (FCC) #define RADIOLIB_LR11X0_LR_FHSS_GRID_STEP_NON_FCC (0x01UL << 0) // 7 0 3.90625 kHz (non-FCC) #define RADIOLIB_LR11X0_LR_FHSS_HOPPING_DISABLED (0x00UL << 0) // 7 0 LR FHSS hopping: disabled #define RADIOLIB_LR11X0_LR_FHSS_HOPPING_ENABLED (0x01UL << 0) // 7 0 enabled #define RADIOLIB_LR11X0_LR_FHSS_BW_39_06 (0x00UL << 0) // 7 0 LR FHSS bandwidth: 39.06 kHz #define RADIOLIB_LR11X0_LR_FHSS_BW_85_94 (0x01UL << 0) // 7 0 85.94 kHz #define RADIOLIB_LR11X0_LR_FHSS_BW_136_72 (0x02UL << 0) // 7 0 136.72 kHz #define RADIOLIB_LR11X0_LR_FHSS_BW_183_59 (0x03UL << 0) // 7 0 183.59 kHz #define RADIOLIB_LR11X0_LR_FHSS_BW_335_94 (0x04UL << 0) // 7 0 335.94 kHz #define RADIOLIB_LR11X0_LR_FHSS_BW_386_72 (0x05UL << 0) // 7 0 386.72 kHz #define RADIOLIB_LR11X0_LR_FHSS_BW_722_66 (0x06UL << 0) // 7 0 722.66 kHz #define RADIOLIB_LR11X0_LR_FHSS_BW_773_44 (0x07UL << 0) // 7 0 773.44 kHz #define RADIOLIB_LR11X0_LR_FHSS_BW_1523_4 (0x08UL << 0) // 7 0 1523.4 kHz #define RADIOLIB_LR11X0_LR_FHSS_BW_1574_2 (0x09UL << 0) // 7 0 1574.2 kHz #define RADIOLIB_LR11X0_LR_FHSS_HEADER_BITS (114) // 7 0 LR FHSS packet bit widths: header #define RADIOLIB_LR11X0_LR_FHSS_FRAG_BITS (48) // 7 0 payload fragment #define RADIOLIB_LR11X0_LR_FHSS_BLOCK_PREAMBLE_BITS (2) // 7 0 block preamble #define RADIOLIB_LR11X0_LR_FHSS_BLOCK_BITS (RADIOLIB_LR11X0_LR_FHSS_FRAG_BITS + RADIOLIB_LR11X0_LR_FHSS_BLOCK_PREAMBLE_BITS) // RADIOLIB_LR11X0_CMD_GET_LORA_RX_HEADER_INFOS #define RADIOLIB_LR11X0_LAST_HEADER_CRC_ENABLED (0x01UL << 4) // 4 4 last header CRC: enabled #define RADIOLIB_LR11X0_LAST_HEADER_CRC_DISABLED (0x00UL << 4) // 4 4 disabled // RADIOLIB_LR11X0_CMD_WIFI_SCAN #define RADIOLIB_LR11X0_WIFI_SCAN_802_11_B (0x01UL << 0) // 7 0 Wi-Fi type to scan: 802.11b #define RADIOLIB_LR11X0_WIFI_SCAN_802_11_G (0x02UL << 0) // 7 0 802.11g #define RADIOLIB_LR11X0_WIFI_SCAN_802_11_N (0x03UL << 0) // 7 0 802.11n #define RADIOLIB_LR11X0_WIFI_SCAN_ALL (0x04UL << 0) // 7 0 all (802.11b first) #define RADIOLIB_LR11X0_WIFI_ACQ_MODE_BEACON_ONLY (0x01UL << 0) // 7 0 Wi-Fi acquisition mode: beacon only #define RADIOLIB_LR11X0_WIFI_ACQ_MODE_BEACON_PACKET (0x02UL << 0) // 7 0 beacon and packet #define RADIOLIB_LR11X0_WIFI_ACQ_MODE_FULL_TRAFFIC (0x03UL << 0) // 7 0 full traffic #define RADIOLIB_LR11X0_WIFI_ACQ_MODE_FULL_BEACON (0x04UL << 0) // 7 0 full beacon #define RADIOLIB_LR11X0_WIFI_ACQ_MODE_SSID_BEACON (0x05UL << 0) // 7 0 SSID beacon #define RADIOLIB_LR11X0_WIFI_ABORT_ON_TIMEOUT_ENABLED (0x01UL << 0) // 7 0 abort scanning on preamble timeout: enabled #define RADIOLIB_LR11X0_WIFI_ABORT_ON_TIMEOUT_DISABLED (0x00UL << 0) // 7 0 disabled #define RADIOLIB_LR11X0_WIFI_MAX_NUM_RESULTS (32) // 7 0 maximum possible number of Wi-Fi scan results #define RADIOLIB_LR11X0_WIFI_ALL_CHANNELS (0x3FFFUL) // 16 0 scan all channels // RADIOLIB_LR11X0_CMD_WIFI_READ_RESULTS #define RADIOLIB_LR11X0_WIFI_RESULT_TYPE_COMPLETE (0x01UL << 0) // 7 0 Wi-Fi scan result type: complete #define RADIOLIB_LR11X0_WIFI_RESULT_TYPE_BASIC (0x04UL << 0) // 7 0 basic #define RADIOLIB_LR11X0_WIFI_RESULT_MAX_LEN (79) // 7 0 maximum possible Wi-Fi scan size // RADIOLIB_LR11X0_CMD_GNSS_SET_CONSTELLATION_TO_USE #define RADIOLIB_LR11X0_GNSS_CONSTELLATION_GPS (0x01UL << 0) // 7 0 GNSS constellation to use: GPS #define RADIOLIB_LR11X0_GNSS_CONSTELLATION_BEIDOU (0x01UL << 1) // 7 0 BeiDou // RADIOLIB_LR11X0_CMD_GNSS_SET_MODE #define RADIOLIB_LR11X0_GNSS_MODE_SINGLE_SCAN (0x00UL << 0) // 7 0 GNSS scanning mode: single/legacy #define RADIOLIB_LR11X0_GNSS_MODE_SINGLE_MULTIPLE (0x03UL << 1) // 7 0 multiple/advanced // RADIOLIB_LR11X0_CMD_GNSS_AUTONOMOUS #define RADIOLIB_LR11X0_GNSS_RES_PSEUDO_DOPPLER_ENABLED (0x01UL << 0) // 0 0 GNSS results in NAV message: pseudo-range (in single scan mode) or Doppler information (in multiple scan mode) #define RADIOLIB_LR11X0_GNSS_RES_PSEUDO_DOPPLER_DISABLED (0x00UL << 0) // 0 0 not included #define RADIOLIB_LR11X0_GNSS_RES_DOPPLER_ENABLED (0x01UL << 1) // 1 1 Doppler information #define RADIOLIB_LR11X0_GNSS_RES_DOPPLER_DISABLED (0x00UL << 1) // 1 1 not included #define RADIOLIB_LR11X0_GNSS_NB_SV_ALL (0x00UL << 0) // 7 0 include all detected satellites #define RADIOLIB_LR11X0_GNSS_AUTO_EFFORT_MODE (0x00UL << 0) // 7 0 reserved, always 0 // RADIOLIB_LR11X0_CMD_GNSS_ASSISTED #define RADIOLIB_LR11X0_GNSS_ASSIST_LOW_POWER (0x00UL << 0) // 7 0 effort mode: low power #define RADIOLIB_LR11X0_GNSS_ASSIST_BEST_EFFORT (0x01UL << 0) // 7 0 best effort // RADIOLIB_LR11X0_CMD_GNSS_GET_CONTEXT_STATUS #define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_NONE (0x00UL << 0) // 7 4 error code: none #define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_ALMANAC_OLD (0x01UL << 0) // 7 4 almanac too old #define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_ALMANAC_CRC (0x02UL << 0) // 7 4 almanac CRC mismatch #define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_FLASH (0x03UL << 0) // 7 4 flash integrity error #define RADIOLIB_LR11X0_GNSS_CONTEXT_ERR_ALMANAC_UPD (0x04UL << 0) // 7 4 almanac update not allowed #define RADIOLIB_LR11X0_GNSS_CONTEXT_FREQ_SPACE_250_HZ (0x00UL << 0) // 8 7 frequency search space: 250 Hz #define RADIOLIB_LR11X0_GNSS_CONTEXT_FREQ_SPACE_500_HZ (0x01UL << 0) // 8 7 500 Hz #define RADIOLIB_LR11X0_GNSS_CONTEXT_FREQ_SPACE_1000_HZ (0x02UL << 0) // 8 7 1000 Hz #define RADIOLIB_LR11X0_GNSS_CONTEXT_FREQ_SPACE_2000_HZ (0x03UL << 0) // 8 7 2000 Hz // RADIOLIB_LR11X0_CMD_GNSS_GET_SV_VISIBLE #define RADIOLIB_LR11X0_SV_CONSTELLATION_GPS (0x00UL << 0) // 7 0 GNSS constellation: GPS #define RADIOLIB_LR11X0_SV_CONSTELLATION_BEIDOU (0x01UL << 0) // 7 0 BeiDou // RADIOLIB_LR11X0_CMD_GNSS_ALMANAC_FULL_UPDATE #define RADIOLIB_LR11X0_GNSS_ALMANAC_HEADER_ID (0x80UL << 0) // 7 0 starting byte of GNSS almanac header #define RADIOLIB_LR11X0_GNSS_ALMANAC_BLOCK_SIZE (20) // RADIOLIB_LR11X0_CMD_GNSS_FETCH_TIME #define RADIOLIB_LR11X0_GNSS_EFFORT_LOW (0x00UL << 0) // 7 0 GNSS effort mode: low sensitivity #define RADIOLIB_LR11X0_GNSS_EFFORT_MID (0x01UL << 0) // 7 0 medium sensitivity #define RADIOLIB_LR11X0_GNSS_FETCH_TIME_OPT_TOW (0x00UL << 0) // 7 0 time fetch options: ToW only, requires WN to demodulated beforehand #define RADIOLIB_LR11X0_GNSS_FETCH_TIME_OPT_TOW_WN (0x01UL << 0) // 7 0 ToW and WN #define RADIOLIB_LR11X0_GNSS_FETCH_TIME_OPT_TOW_WN_ROLL (0x02UL << 0) // 7 0 ToW, WN and rollover // RADIOLIB_LR11X0_CMD_GNSS_READ_DEMOD_STATUS #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_NOT_POSSIBLE (-21) // 7 0 GNSS demodulation status: not possible to demodulate #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_SAT_LOST (-20) // 7 0 satellite lost #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_ALMANAC_DEMOD_ERROR (-19) // 7 0 almanac demodulation error #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_TOO_LATE (-18) // 7 0 woke up after preamble (demodulation started too late) #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_20_MS_FAIL (-17) // 7 0 20ms real-time clock failed #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_WAKE_UP_FAIL (-16) // 7 0 wake up sync failed #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_WN_INVALID (-15) // 7 0 week number not validated #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_NO_ACTIVE_SAT (-14) // 7 0 no active satellite selected in satellite list #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_SLEEP_TOO_LONG (-13) // 7 0 sleep time too long #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_TOW_INVALID (-12) // 7 0 wrong time-of-week demodulated #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_PREAMBLE_INVALID (-11) // 7 0 preamble not validated #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_DISABLED (-10) // 7 0 demodulator disabled #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_EXTR_FAILED (-9) // 7 0 demodulator extraction failed #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_NO_BIT_CHANGE (-8) // 7 0 no bit change found during demodulation start #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_NO_BIT_CHANGE_ADV (-7) // 7 0 no bit change found during advanced scan #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_NO_SAT_FOUND (-6) // 7 0 no satellites found #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_SYNC_LOST (-5) // 7 0 word sync lost #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_PARITY_NOT_ENOUGH (-3) // 7 0 parity check fail (not enough) #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_PARITY_TOO_MANY (-2) // 7 0 parity check fail (too many) #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_NO_PARITY (-1) // 7 0 parity check fail (no parity found) #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_WORD_SYNC_NONE (0) // 7 0 word sync search not started #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_WORD_SYNC_POT (1) // 7 0 potential word sync found #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_WORD_SYNC_OK (2) // 7 0 word sync found #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_TOW_FOUND (3) // 7 0 time-of-week found #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_WN_FOUND (4) // 7 0 week number and time-of-week found #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_ALM_FOUND_UNSAVED (5) // 7 0 almanac found but not saved #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_HALF_ALM_SAVED (6) // 7 0 half of almanac found and saved #define RADIOLIB_LR11X0_GNSS_DEMOD_STATUS_FULL_ALM_SAVED (7) // 7 0 full almanac found and saved #define RADIOLIB_LR11X0_GNSS_DEMOD_INFO_WORD_SYNC_FOUND (0x01UL << 0) // 7 0 GNSS demodulation info: word synchronization found #define RADIOLIB_LR11X0_GNSS_DEMOD_INFO_TOW_FOUND (0x01UL << 1) // 7 0 time-of-week found #define RADIOLIB_LR11X0_GNSS_DEMOD_INFO_WN_DEMODED (0x01UL << 2) // 7 0 week number demodulated #define RADIOLIB_LR11X0_GNSS_DEMOD_INFO_WN_FOUND (0x01UL << 3) // 7 0 week number found #define RADIOLIB_LR11X0_GNSS_DEMOD_INFO_SUBFRAME_1_FOUND (0x01UL << 4) // 7 0 subframe 1 found #define RADIOLIB_LR11X0_GNSS_DEMOD_INFO_SUBFRAME_4_FOUND (0x01UL << 5) // 7 0 subframe 4 found #define RADIOLIB_LR11X0_GNSS_DEMOD_INFO_SUBFRAME_5_FOUND (0x01UL << 6) // 7 0 subframe 5 found // RADIOLIB_LR11X0_CMD_GNSS_READ_ALMANAC_STATUS #define RADIOLIB_LR11X0_GNSS_ALMANAC_STATUS_UP_TO_DATE (0) // 7 0 GPS/BeiDou almanac status: all satellites up-to-date #define RADIOLIB_LR11X0_GNSS_ALMANAC_STATUS_OUTDATED (1) // 7 0 at least one satellite needs update // RADIOLIB_LR11X0_CMD_GNSS_READ_DOPPLER_SOLVER_RES #define RADIOLIB_LR11X0_GNSS_SOLVER_ERR_NONE (0) // 7 0 internal 2D solver error: no error #define RADIOLIB_LR11X0_GNSS_SOLVER_ERR_RES_HIGH (1) // 7 0 residue too high #define RADIOLIB_LR11X0_GNSS_SOLVER_ERR_NOT_CONVERGED (2) // 7 0 not converged on solution #define RADIOLIB_LR11X0_GNSS_SOLVER_ERR_NOT_ENOUGH_SV (3) // 7 0 not enough satellites #define RADIOLIB_LR11X0_GNSS_SOLVER_ERR_ILL_MATRIX (4) // 7 0 matrix error (?) #define RADIOLIB_LR11X0_GNSS_SOLVER_ERR_TIME (5) // 7 0 time error #define RADIOLIB_LR11X0_GNSS_SOLVER_ERR_ALM_PART_OLD (6) // 7 0 part of almanac too old or not available #define RADIOLIB_LR11X0_GNSS_SOLVER_ERR_INCONSISTENT (7) // 7 0 not consistent with history (?) #define RADIOLIB_LR11X0_GNSS_SOLVER_ERR_ALM_OLD (8) // 7 0 all of almanac too old // RADIOLIB_LR11X0_CMD_CRYPTO_SET_KEY #define RADIOLIB_LR11X0_CRYPTO_STATUS_SUCCESS (0x00UL << 0) // 7 0 crypto engine status: success #define RADIOLIB_LR11X0_CRYPTO_STATUS_FAIL_CMAC (0x01UL << 0) // 7 0 MIC check failed #define RADIOLIB_LR11X0_CRYPTO_STATUS_INV_KEY_ID (0x03UL << 0) // 7 0 key/parameter source or destination ID error #define RADIOLIB_LR11X0_CRYPTO_STATUS_BUF_SIZE (0x05UL << 0) // 7 0 data buffer size invalid #define RADIOLIB_LR11X0_CRYPTO_STATUS_ERROR (0x06UL << 0) // 7 0 generic error // RADIOLIB_LR11X0_CMD_CRYPTO_PROCESS_JOIN_ACCEPT #define RADIOLIB_LR11X0_CRYPTO_LORAWAN_VERSION_1_0 (0x00UL << 0) // 7 0 LoRaWAN version: 1.0.x #define RADIOLIB_LR11X0_CRYPTO_LORAWAN_VERSION_1_1 (0x01UL << 0) // 7 0 1.1 #endif #endif